How to Install Mosquito Net on Plastic Window

Mosquitoes, flies and other mosquitoes not only disturb people to enjoy a warm summer time, but are carriers of dangerous infectious diseases. And it might be great to use the mosquito dome net as you are sleeping, but the mosquitoes are always annoying while you got to pause. To save from their negative presence can provide a mosquito net mounted on a plastic window.

1. If your plastic window is supplied with an elegant mosquito net, you can manually correct this drawback. Take measurement of the window opening where you plan to install a grid. Data must be accurate, an error of even a few millimeters will give you a lot of headache. Cut grid may not come to the window and the material will be wasted.

2. After measuring, record the data on paper, take the scissors and cut the mesh to the shape of the window based on its size. Leave a small margin of a few centimeters around the perimeter that will be used for attachment to the window frame. Next, start the installation of the mosquito nets.

3. Fixing mosquito nets should not be done alone, you still need help. One person should hold her, smoothing out around the perimeter and making sure that there are no crevices or other places for insects. For fastening you can use tape or glue. The main thing is that the surface of a plastic window was broken. Secure the corners. Carefully look around the result. If all went well, the entrance of mosquitoes and flies in your home will be ordered.

4. You can also go make yourself a frame out of slats on the window size. And the frame with the buttons, studs or glue to pull the mosquito net. But measure be very precise to the frame was no more and no less than the window opening. This alternative is more civilized than the first.